Mitsubishi Electric Multi Split Inverter 1-Way Ceiling Cassette MLZ Indoor Unit
> The very low installation height of max. 180 mm facilitates installation - even in confined spaces.
> Areas that are normally not covered by the air flow can be conditioned accordingly. Thanks to the new 3-D fan control, the airflow can be optimally adjusted by remote control in all directions (left/right/top/bottom).
> At 15 kg, the easy-to-install 1-way cassette is one of the lightweights
> Infrared remote control with fuzzy logic control and 24h timer
> Long-life filters as standard, which only need to be cleaned every 2,500 operating hours during normal operation
> Automatic restart after power failure can be set
> Condensate pump with a delivery height of 500 mm is already integrated
> Flexible condensate drain hose for easy connection to the condensate drain system. An extra condensate tray prevents condensation water from dripping unhindered from the refrigeration connections
> The special design of the fan impeller ensures a very low noise level, with high air volume flows at the same time
> Depending on the ceiling height, the air volume flow can be individually adjusted up to a ceiling height of 2.7 m.
Advantages and areas of application (general)
Room air conditioners for an optimal climate of well-being
The M series cools or heats small to medium-sized rooms in a very energy-saving way. The advanced systems can be installed as single or multi-split solutions in living rooms, small offices or surgeries, where they impress with their inconspicuousness: compact dimensions, discreet design and whisper-quiet operation allow only the feel-good climate to come to the fore.
The system variants
> Single split or multi split arrangement of 2 to 8 indoor units.
> Easy-to-install indoor units as ceiling cassettes, in ceiling concealed, recessed duct, wall and chest versions.
> Energy-saving outdoor units as non-inverter cooling units, heat pumps and inverters.
> Power supply 230 V, 1 phase, 50 Hz.
The Inverter and Non-Inverter series are not compatible. The reason lies in the communication of the unit series. Non-Inverter units communicate via the conventional RAC control. Inverter units are equipped with the new New A-Control.
The advantages at a glance
Already included as standard:
> A practical infrared remote control with fuzzy logic control is included with the indoor units. A high-quality wired remote control with weekly timer and self-diagnosis function is supplied with the ducted built-in units.
> The outdoor units are prefilled with CFC-free R32 refrigerant at the factory.
> A type-dependent winter control for cooling operation down to -10 °C or -15 °C is integrated in all inverter outdoor units.
> Automatic restart after power failure. The personal room climate can be stored as desired.
> Energy-saving and fast room air cooling via swing mode.
> All indoor units are pure white (approximately RAL 9010). The wall units have a modern flat-panel design.
> The noise-optimised indoor units are barely audible in operation.
> In sleep mode with only 19 dB(A) in cooling mode, the MSZ-GE22/25/35VA wall-mounted units ensure the right night's rest with a gentle air flow.
Highest energy efficiency
> Save additional energy with the Econo Cool function: in cooling mode, the set temperature is automatically raised by 2 °C. A special fan programme then ensures that the set temperature is maintained. A special fan programme then ensures a constant and pleasant room climate, although the cooling capacity is minimised.
> Energy-saving inverter technology: The inverter systems work absolutely economically thanks to stepless output adjustment. They provide exactly the cooling/heating capacity that is needed at the moment.
> The energy-saving rotary piston compressors score with their minimal noise and vibration development.
Installation and retrofitting made easy
> The compact dimensions of the indoor and outdoor units ensure flexible installation.
> The Inverter Multi Split systems can be retrofitted and removed at any time. At least two indoor units are required as a basis, which can be expanded to up to eight indoor units at a later date.
Technical changes and errors excepted.
|Marke / Model||Mitsubishi / MLZ-KP25VF|
|Heating capacity (kW):||3,3|
|Technical data :|
|Air volume flow im Cooling mode N / M / H (m3/h))||360 / - / 528|
|Sound pressure level indoor unit N / H (dB(A)) :||27 / 38|
|Dimensions W / D / H (mm) :||1102 / 360 / 185|
|Weight: (kg) :||15,5|
|Refrigerant type:||R32 oder R410A|
Average product review
Please note that by purchasing they confirm "REGULATION (EU) No. 517/2014 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 April 2014 üon fluorinated greenhouse gases and repealing Regulation (EC) No. 842/2006" and only a suitably certified company may carry out the installation.